Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Climate Control Bulb on the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Instrument panel light

See other generations:
Video tutorial

If the bulb illuminating the climate control on the Fiat Panda's dashboard burns out, replace it to restore nighttime visibility. Use two plastic levers to avoid scratching the dashboard surfaces, inserting them under the climate control frame—one at the top of the fan control and the other at the side of the temperature control.

Apply force to remove the panel with the two controls and access the bulb. Remove the burnt bulb and insert a new one, ensuring it works correctly before refitting the control panel.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Replace the Knob Bulbs on a Fiat Panda
How to Replace the Knob Bulbs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, sit in the driver's seat of your Fiat Panda. Start by prising off and removing the two smaller knobs by pulling them towards you. N…
How to Remove the Heating Controls on Fiat Panda 2
How to Remove the Heating Controls on Fiat Panda 2
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, learn how to remove the heating or air conditioning controls on a second-generation Fiat Panda, following the instructions be…
Replacing the H4 Bulb on a Fiat Panda
Replacing the H4 Bulb on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the H4 bulb of the front headlight on a Fiat Panda, you need to access the engine compartment by opening the bonnet. Locate the bulb to be…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos