Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the H4 Bulb on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

To replace the H4 bulb of the front headlight on a Fiat Panda, you need to access the engine compartment by opening the bonnet. Locate the bulb to be replaced at the rear of the headlight unit, unclip the retaining lever of the plastic cover of the light compartment, and remove it. Identify the bulb to be extracted and unclip the fixing block by levering it. At this point, you can extract the bulb by twisting it from its socket, taking care not to break the glass.

Unclip the bulb from the connector and take the new one, reinsert the bulb into the connector, and reposition it. Finally, reverse all the removal steps to reassemble.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb in Your Fiat Panda
How to Replace the Front Headlamp Bulb in Your Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replacing the front headlamp bulb in your Fiat Panda is very simple. To complete the task, follow the procedure outlined in this guide. First, buy a …
Replacing Front Headlight Bulb on Fiat Panda 169
Replacing Front Headlight Bulb on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Today, you will learn how to remove and replace the front headlight bulb on a Fiat Panda 169, as well as on other FCA group car models. First, open t…
How to Replace the Daytime Running Light Bulb on the Fiat Panda?
How to Replace the Daytime Running Light Bulb on the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) To replace the daytime running light bulb on the Fiat Panda, open the bonnet to access the engine bay. The bulb to be replaced is located directly un…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos