Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Daytime Running Light Bulb on the Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Light bulb

See other generations:
Video tutorial

To replace the daytime running light bulb on the Fiat Panda, open the bonnet to access the engine bay. The bulb to be replaced is located directly under the circular cover that closes the inner part of the headlamp. To remove it, rotate the connector and pull the bulb out of its housing; now, disconnect the bulb from the connector and attach the new replacement part.

Once the new bulb is connected, insert it back into its housing and check that everything works correctly.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Replace the Daytime Running Light Bulb on a Fiat Panda?
How to Replace the Daytime Running Light Bulb on a Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) To replace the daytime running light bulb on a Fiat Panda, turn the steering wheel in the opposite direction to the bulb that needs replacing. This w…
How to Replace the Daytime Running Light Bulb on a Fiat Panda
How to Replace the Daytime Running Light Bulb on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Replacing the daytime running light on a Fiat Panda is a straightforward task that you can do independently. This short video will guide you step by …
How to deactivate the daytime running lights on the Fiat Panda
How to deactivate the daytime running lights on the Fiat Panda
Fiat Panda (2012-2023 / ) Disabling the Daytime Running Lights (DRL) in the Fiat Panda can vary depending on the model and year of production. In many models, the daytime runn…

    Frequently Asked Questions

    • Panda 2003-2012 - How many reversing lights are there on the Fiat Panda? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos