Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Daytime Running Light Bulb on a Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Light bulb

To replace the daytime running light bulb on a Fiat Panda, turn the steering wheel in the opposite direction to the bulb that needs replacing. This will make it easier to remove the inner wheel arch cover to access the bulb. The bulb must then be extracted from its housing and disconnected from the corresponding connector. Once the old bulb is removed, install a new one by connecting it to the connector and inserting it back into its housing. After replacement, reposition the inner wheel arch cover.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Daytime Running Light Bulb on the Fiat Panda?
How to Replace the Daytime Running Light Bulb on the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) To replace the daytime running light bulb on the Fiat Panda, open the bonnet to access the engine bay. The bulb to be replaced is located directly un…
How to Replace the Daytime Running Light Bulb on a Fiat Panda
How to Replace the Daytime Running Light Bulb on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Replacing the daytime running light on a Fiat Panda is a straightforward task that you can do independently. This short video will guide you step by …
How to deactivate the daytime running lights on the Fiat Panda
How to deactivate the daytime running lights on the Fiat Panda
Fiat Panda (2012-2023 / ) Disabling the Daytime Running Lights (DRL) in the Fiat Panda can vary depending on the model and year of production. In many models, the daytime runn…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How many reversing lights are there on the Fiat Panda? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos