Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Lights of the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

Today, you will see the instructions for removing and replacing the position bulbs or daytime running lights of the Fiat Panda. First, open the bonnet of the vehicle and start detaching and removing the bulb holder along with the bulb from the position light; then remove the bulb from the holder, as shown in the video.

Next, install the new light in the holder, turning it to secure it properly; check the bulb's operation before refitting it into the light unit, applying the reverse procedure!


Updated on 13 August 2026 by ScegliAuto


Related tutorials

Replace Front Position Lights on Fiat Panda 3
Replace Front Position Lights on Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, you will learn how to remove and replace the front position bulbs on a Fiat Panda third series, following the steps outlined …
How to Replace the Front Position Bulb in the Fiat Panda
How to Replace the Front Position Bulb in the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This guide provides information on the procedure for removing and replacing the front position bulb in the Fiat Panda's headlamp. First, open the bon…
How to Replace the Dipped Beam Bulbs in a Fiat Panda
How to Replace the Dipped Beam Bulbs in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This short video will show you how to remove the old H4 bulbs for the dipped beams in your Fiat Panda and replace them with new bulbs. This is a simp…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos