Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Front Position Lights on Fiat Panda 3

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Headlight bulb

In this video tutorial, you will learn how to remove and replace the front position bulbs on a Fiat Panda third series, following the steps outlined below. First, turn the wheels to the affected side to access the bulbs; then remove the front wheel arch liners by unscrewing the fixing screws. At this point, disconnect the electrical connector and remove the bulb along with the holder, as shown in the video; simply replace it with the new one of the correct type, and reassemble everything by applying the reverse procedure of disassembly!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Dipped Headlights on a Fiat Panda 169
How to Adjust the Dipped Headlights on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will learn how to adjust the height or angle of the dipped headlights on a Fiat Panda 169. You can make the adjustment in two d…
How to replace the front headlight bulbs in the Fiat Panda?
How to replace the front headlight bulbs in the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) In this tutorial, we can see how to replace the front headlight bulbs in the Fiat Panda, an extremely simple and fast operation. First of all, make s…
Replacing Fog Lights on a Fiat Panda
Replacing Fog Lights on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, you will see how to remove and replace the bulbs of the front fog lights on a Fiat Panda third series. First, remove the scre…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos