Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant in the Fiat Panda?

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Antifreeze coolant

To replace the coolant in the Fiat Panda, access the underside of the car and loosen the retaining ring that secures the cooling hose to the tank. By removing the ring, you can detach the hose and collect the used fluid in a container. Next, it is advisable to check the condition of the coolant temperature sensor: to do this, disconnect its connector and remove it using a suitable socket wrench. After checking it, you can reinstall it and top up with new coolant.

Updated on 25 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Bleed and Replace the Radiator Fluid on Fiat Panda 169 1.2 Petrol
How to Bleed and Replace the Radiator Fluid on Fiat Panda 169 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) Follow these steps to bleed and replace the radiator fluid on a Fiat Panda 169 second series, with a 1.2 petrol engine. First, open the bonnet of you…
How do you top up the coolant in the Fiat Panda?
How do you top up the coolant in the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) To top up the coolant of the Fiat Panda, you will need to open the hood so that you can locate the components inside the engine compartment: in the t…
How to Replace the Gear Knob on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, sit in the driver's seat of your Fiat Panda. It is strongly advised to perform this operation with the engine off, to avoid acc…

    Frequently Asked Questions

    • Panda 2012-2026 - Where to put water in the Fiat Panda? Read answer
    • Panda 2003-2012 - Where are the water bleed valves of the Fiat Panda? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos