Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Thermostat on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Thermostat

Learn how to replace the thermostat on a Fiat Panda. Lift the front bonnet of the car and locate the parts to remove to access the thermostat. Remove the battery from the engine compartment along with its housing. Raise the car and detach the radiator hose (drain the cooling system). Disconnect the coolant hose from both ends, then unscrew the thermostat housing bolts as shown in the video (use a socket spanner with the appropriate sockets). Extract the thermostat after removing all the securing bolts. Insert the new part and tighten the bolts securely. Refill the coolant reservoir with new fluid after reconnecting all the components.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat on a Fiat Panda
How to Replace the Thermostat on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the thermostat on a Fiat Panda, open the bonnet to access the components inside the engine block. The thermostat is connected to a pipe lo…
How to Replace the Thermostat on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video outlines all the necessary steps to replace the thermostat on a Fiat Panda 169, including how to replace the temperature sensor. By follow…
How to Remove the Thermostat from a Fiat Panda
How to Remove the Thermostat from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, open the bonnet of your Fiat Panda. Start by removing the upper air filter housing by unscrewing the fastening screws and disconnec…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos