Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you top up the coolant in the Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Antifreeze coolant

To top up the coolant of the Fiat Panda, you will need to open the hood so that you can locate the components inside the engine compartment: in the top left part, you will find the tank that contains the coolant. This cap should be unscrewed with the engine cold to avoid dangerous situations due to high pressure; once the cap has been removed, you can top up by adding the necessary amount of liquid into the tank. After topping up, you can close it by inserting the cap and checking that everything is working properly.

Posted on 18 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the coolant in the Fiat Panda?
Fiat Panda (1980-2003 / 141, MK 1) To replace the coolant in the Fiat Panda, access the underside of the car and loosen the retaining ring that secures the cooling hose to the tank. By…
How to Replace the Radiator Fluid on a Panda
How to Replace the Radiator Fluid on a Panda
Fiat Panda (2003-2012 / 169, MK 2) Is the radiator fluid due for replacement? Let’s look at draining the coolant on a Panda. Lift the car on a jack, disconnect the radiator hose at the…
How to Top Up the Screenwash Fluid in the Fiat Panda?
How to Top Up the Screenwash Fluid in the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To top up the screenwash fluid in the Fiat Panda, open the bonnet using the lever located under the steering column. Once the bonnet is open, you wil…

    Frequently Asked Questions

    • Panda 2012-2026 - Where to put water in the Fiat Panda? Read answer
    • Panda 2003-2012 - Where are the water bleed valves of the Fiat Panda? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos