Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Reverse Light Switch on the Fiat Ducato (2006)

Model: Fiat Ducato - Years 2002-2006
Part: Reverse light switch

In this video tutorial, you will see how to disassemble and replace the reverse light switch on the second series Fiat Ducato from 2006, with a 2.8 JTD engine. First, open the bonnet of your car and start by removing the air filter box and the intake hose to access the reverse light switch located underneath. At this point, use a 13 mm spanner to unscrew the sensor's bolts, allowing you to remove it and replace it with the new one; then reassemble everything, following the video tutorial to the end!

Updated on 26 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Reverse Light Switch in a Fiat Ducato Camper
How to Change the Reverse Light Switch in a Fiat Ducato Camper
Fiat Ducato (2002-2006 / ) This video tutorial explains how to change the reverse light switch in a Fiat Ducato camper if it fails. Sometimes, the wire on the connector located…
How to replace the light switch of the Fiat Ducato
How to replace the light switch of the Fiat Ducato
Fiat Ducato (2006-2014 / X250) The steps illustrated in this guide will show us how to disassemble and replace the light switch of the Fiat Ducato. First, we get into the vehicle a…
How to Replace the Reverse Switch on a Fiat Ducato
How to Replace the Reverse Switch on a Fiat Ducato
Fiat Ducato (1993-2016 / MK 2) To replace the reverse switch on a Fiat Ducato, open the bonnet to access the components inside the engine bay. In the upper right part, you will fin…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos