Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Tipo
    4. : How to reset the uConnect system in the Fiat Tipo?

Fiat Tipo - Video tutorial

Model: Fiat Tipo 357, 356, 358 - Years 2016-2023
Part: -board computer
Operation: How to reset the uConnect system in the Fiat Tipo?

In case we need to reset the uConnect system in the Fiat Tipo to the default settings, we can see how to do it in the attached video guide, valid for all models equipped with this system. To reset, you need to access the hidden menu known as the "engineering menu". To access the menu, keep the "radio" and "more" keys pressed at the same time, until the screen changes. At this point, with the right knob or with the touch screen, scroll down and find the item "Reset to factory defaults". We confirm the choice and wait for 30 seconds as indicated on the display.


Posted on 9 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Fiat Tipo 2016-2023 - Why is the START&STOP system of the Fiat Tipo not working? Read Answer
    • Fiat Tipo 2016-2023 - What to do if the 'Park assist not available' warning appears on the Fiat Tipo? Read Answer
    • Fiat Tipo 2016-2023 - How to reset the Uconnect system in the Fiat Tipo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos