Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Shell on a Fiat Punto Evo?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Key

To replace the key shell on a Fiat Punto Evo, first lift the key blade and then loosen the screw located inside its housing. This will allow you to remove the compartment containing the battery; next, by prying at the top, remove the cover from the back, disengaging the latch. Now, you can loosen the underlying screw and open the remote to extract the key chip. This chip must be inserted into the new shell, which should be closed by reversing the previous steps.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle and Replace the Key Shell of the Fiat Punto Evo
How to Dismantle and Replace the Key Shell of the Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Next, we will see the instructions that will allow you to dismantle and replace the key shell of the Fiat Punto Evo, as well as the Grande Punto and …
How to Replace the Key Shell of the Fiat Grande Punto
How to Replace the Key Shell of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the key shell of the Fiat Grande Punto, lift the ignition key to loosen the screw located inside its housing. Once this screw is removed, …
How to Replace the Key Shell of the Fiat Grande Punto
How to Replace the Key Shell of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the key shell of the Fiat Grande Punto, start by prying off the outer shell with a small flathead screwdriver, removing the section with t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos