Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the date and time on the Fiat 500 (2020)

Model: Fiat 500 312 - Years 2007-2021
Part: Clock

In this video, you will learn how to change the time and date on the 2020 Fiat 500, as well as on the 500X and Tipo, by following these simple and quick steps. First, get in the car and turn on the ignition; then, using the central display, navigate to the settings menu of the instrument panel and then to date and time, as shown in the video. At this point, set the correct time and date by scrolling with the arrows; finally, exit the menu and start the engine, checking that the time has been saved!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Time and Date on the Fiat 500
How to Change the Time and Date on the Fiat 500
Fiat 500 (2007-2021 / 312) If the display of your new Fiat 500 shows a date and time different from the correct one, you need to manually change both. To do this, simply follow…
How to manually change the date and time on the Fiat 500?
How to manually change the date and time on the Fiat 500?
Fiat 500 (2020-2026 / 500 E, 332) Let's see how to manually change the date and time on the Fiat 500e: the procedure is carried out entirely through the car's touchscreen. We touch th…
How to set the date and time on the Fiat 500
How to set the date and time on the Fiat 500
Fiat 500 (2007-2024 / 312) Today we will see the instructions that will allow us to set the date and time of the Fiat 500. First of all, we get on board the car and start the i…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos