Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Hood of the Fiat Barchetta?

Model: Fiat Barchetta MK 1 - Years 1994-2005
Part: Convertible top

To replace the hood of the Fiat Barchetta, detach the front part from the top of the windscreen and loosen all the screws underneath. Next, unscrew the two side screws, each corresponding to a seal. The third seal can be removed simply by pulling it out, as it has no fixing screw. At this point, loosen the eleven screws that secure the metal profile of the rear part of the hood, which can then be removed. The last parts to remove are the two steel cables that secure the hood, one on each side: use a screwdriver to lever out the eyelet and remove the cables, allowing the hood to be completely detached.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster of the Fiat Barchetta?
How to Remove the Instrument Cluster of the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) To remove the instrument cluster of the Fiat Barchetta, loosen the two bolts located in the centre of the cluster. Once these are loosened, unscrew t…
How to Replace the Internal Handle of a Fiat Barchetta
How to Replace the Internal Handle of a Fiat Barchetta
Fiat Barchetta (1994-2005 / MK 1) To replace the internal handle of a Fiat Barchetta, use a tool to pry off the speaker cover: beneath it, you will find screws that need to be loosene…
How to Remove the Antenna from the Fiat Barchetta?
How to Remove the Antenna from the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) This tutorial demonstrates how to remove the antenna from the Fiat Barchetta, a simple and quick operation. First, ensure the key is not in the ignit…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos