Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of the Fiat Barchetta 1.8

Model: Fiat Barchetta MK 1 - Years 1994-2005
Part: Headlight

In this video tutorial, learn how to remove and replace the front headlight of the Fiat Barchetta 1.8i, following the instructions below. First, open the bonnet and start by removing the front bumper; to do this, unscrew the fastening screws found above and below it, also removing those located on both sides of the front wheel arches. Next, unscrew the screws of the front headlight to detach it, accessing it from the wheel arch; disconnect the electrical connector of the bulbs to remove it completely. Now replace and reassemble everything!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight on the Fiat Barchetta?
How to Remove the Front Headlight on the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) To remove the front headlight on the Fiat Barchetta, first remove the front bumper so that you can loosen the screws securing the lower supports of t…
How to Remove and Refit the Headrest on a Fiat Barchetta
How to Remove and Refit the Headrest on a Fiat Barchetta
Fiat Barchetta (1994-2005 / MK 1) In this short video, we will see the steps to remove and refit the front headrest on a Fiat Barchetta, following the instructions below. First, open …
How to Remove the Antenna from the Fiat Barchetta?
How to Remove the Antenna from the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) This tutorial demonstrates how to remove the antenna from the Fiat Barchetta, a simple and quick operation. First, ensure the key is not in the ignit…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos