Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Antenna from the Fiat Barchetta?

Model: Fiat Barchetta MK 1 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Antenna

Video tutorial

This tutorial demonstrates how to remove the antenna from the Fiat Barchetta, a simple and quick operation. First, ensure the key is not in the ignition, then open the boot and remove the plastic panel on the right side.

Next, unscrew the fastening bolts of the mechanism using an 8mm socket, disconnect the power connector of the electric motor, and remove the earth bolt. Once the entire assembly is removed from the wall, you can install the replacement by following the reverse procedure.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster of the Fiat Barchetta?
How to Remove the Instrument Cluster of the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) To remove the instrument cluster of the Fiat Barchetta, loosen the two bolts located in the centre of the cluster. Once these are loosened, unscrew t…
How to Replace the Internal Handle of a Fiat Barchetta
How to Replace the Internal Handle of a Fiat Barchetta
Fiat Barchetta (1994-2005 / MK 1) To replace the internal handle of a Fiat Barchetta, use a tool to pry off the speaker cover: beneath it, you will find screws that need to be loosene…
How to Replace the Thermostat in a Fiat Barchetta?
How to Replace the Thermostat in a Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) In this video, see how to replace the thermostat in a Fiat Barchetta, a very simple operation. First, it is advisable to drain the entire coolant cir…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos