Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster of the Fiat Barchetta?

Model: Fiat Barchetta MK 1 - Years 1994-2005
Part: Instrument cluster

To remove the instrument cluster of the Fiat Barchetta, loosen the two bolts located in the centre of the cluster. Once these are loosened, unscrew the ones located under the steering column to remove the relevant cover and also the one around the instrument cluster. Now, you can grasp the instrument cluster itself and pull it out of its housing, disconnecting the connectors at the back. Once the old instrument cluster is removed, install a new one.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Internal Handle of a Fiat Barchetta
How to Replace the Internal Handle of a Fiat Barchetta
Fiat Barchetta (1994-2005 / MK 1) To replace the internal handle of a Fiat Barchetta, use a tool to pry off the speaker cover: beneath it, you will find screws that need to be loosene…
How to Remove the Rear Bumper of the Fiat Barchetta?
How to Remove the Rear Bumper of the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) To remove the rear bumper of the Fiat Barchetta, you need to remove the bolts located inside the rear light housings. Next, loosen the bolts found in…
How to Remove the Front Headlight on the Fiat Barchetta?
How to Remove the Front Headlight on the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) To remove the front headlight on the Fiat Barchetta, first remove the front bumper so that you can loosen the screws securing the lower supports of t…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos