Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Fiat Barchetta?

Model: Fiat Barchetta MK 1 - Years 1994-2005
Part: Rear bumper

To remove the rear bumper of the Fiat Barchetta, you need to remove the bolts located inside the rear light housings. Next, loosen the bolts found inside the boot and within both rear wheel arches. The last step before removal is to detach the fog lights from their housing: once these are removed, you can detach the bumper by disconnecting all related connectors. Finally, you can install the new bumper.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Bumper from Fiat Barchetta
Removing Rear Bumper from Fiat Barchetta
Fiat Barchetta (1994-2005 / MK 1) In this video tutorial, you will learn how to remove the rear bumper from a Fiat Barchetta. First, open the boot and using a screwdriver, start remov…
How to Remove the Front Headlight of the Fiat Barchetta 1.8
How to Remove the Front Headlight of the Fiat Barchetta 1.8
Fiat Barchetta (1994-2005 / MK 1) In this video tutorial, learn how to remove and replace the front headlight of the Fiat Barchetta 1.8i, following the instructions below. First, open…
How to Remove the Front Headlight on the Fiat Barchetta?
How to Remove the Front Headlight on the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) To remove the front headlight on the Fiat Barchetta, first remove the front bumper so that you can loosen the screws securing the lower supports of t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos