Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Bumper from Fiat Barchetta

Model: Fiat Barchetta MK 1 - Years 1994-2005
Part: Rear bumper

In this video tutorial, you will learn how to remove the rear bumper from a Fiat Barchetta. First, open the boot and using a screwdriver, start removing the plastic side panel; then remove the clips on the sides and disconnect the electrical connectors of the bulb units. At this point, remove them from the outside and locate the bolts of the bumper that you will subsequently unscrew: apply some penetrating fluid if they are too tight or difficult to unscrew. Now, gently unclip the bumper as shown in the video.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of the Fiat Barchetta?
How to Remove the Rear Bumper of the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) To remove the rear bumper of the Fiat Barchetta, you need to remove the bolts located inside the rear light housings. Next, loosen the bolts found in…
How to Remove the Front Headlight of the Fiat Barchetta 1.8
How to Remove the Front Headlight of the Fiat Barchetta 1.8
Fiat Barchetta (1994-2005 / MK 1) In this video tutorial, learn how to remove and replace the front headlight of the Fiat Barchetta 1.8i, following the instructions below. First, open…
Removing Fuses on Fiat Barchetta
Removing Fuses on Fiat Barchetta
Fiat Barchetta (1994-2005 / MK 1) Let’s see how to remove the fuses on a Fiat Barchetta. Open the car door and locate the box where the fuses are stored. Use a plastic lever to remove…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos