Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Refit the Headrest on a Fiat Barchetta

Model: Fiat Barchetta MK 1 - Years 1994-2005

In this short video, we will see the steps to remove and refit the front headrest on a Fiat Barchetta, following the instructions below. First, open the front door and fully raise the headrest by pressing the side button that releases the catch; then use pliers to rotate the headrest shaft to remove it, as shown in the video. At this point, also remove the other rod and the lower support plastic; all that remains is to refit everything by applying the reverse procedure!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Antenna from the Fiat Barchetta?
How to Remove the Antenna from the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) This tutorial demonstrates how to remove the antenna from the Fiat Barchetta, a simple and quick operation. First, ensure the key is not in the ignit…
How to Remove the Front Headlight of the Fiat Barchetta 1.8
How to Remove the Front Headlight of the Fiat Barchetta 1.8
Fiat Barchetta (1994-2005 / MK 1) In this video tutorial, learn how to remove and replace the front headlight of the Fiat Barchetta 1.8i, following the instructions below. First, open…
How to Remove the Instrument Cluster of the Fiat Barchetta?
How to Remove the Instrument Cluster of the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) To remove the instrument cluster of the Fiat Barchetta, loosen the two bolts located in the centre of the cluster. Once these are loosened, unscrew t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos