Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on a Fiat Grande Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Headlight bulb

In this video tutorial, you will learn how to remove and replace the front headlight bulbs on a Fiat Grande Punto. First, open and lift the bonnet and remove the plastic cover protecting the bulbs. Then, disconnect the electrical connector from the dipped beam bulb and unclip the metal spring to release it. At this point, remove the bulb and replace it with a new one of the correct type (in this case, H4 fitting). Insert the new bulb and reassemble everything by following the reverse procedure of disassembly!

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Indicator Bulb on Fiat Grande Punto
Replacing Front Indicator Bulb on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, we will see how to remove and replace the indicator bulb of the front headlight on a Fiat Grande Punto. First, open the car's bonnet: then loc…
Replace the Headlight Bulb on a Fiat Grande Punto
Replace the Headlight Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, follow the step-by-step instructions to remove and replace the dipped beam bulb of the front headlamp on a Fiat Grande Punto. First, o…
How to Replace the Front Headlamp Bulb of a Fiat Punto
How to Replace the Front Headlamp Bulb of a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos