Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the seat belt in the Fiat Doblò

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years 2009-2021
Part: Checks and maintenance

In this video we will see how to remedy the locking of the driver's seat belt on the Fiat van, the Doblò. We open the plastic cover at the base of the belt, removing the bolts that hold it in place; this is necessary because it is necessary to act on the mechanism itself. We remove the further stop of the belt, unscrewing it, and we detach it from its original seat. Completely removed the plastic cover of the panel we can see where the seat belt is locked; At this point we unscrew the further fixing pin and unhook the remaining part of the belt from its seat. Now let's clean the roller with the compressor and oil the mechanism. It should now work properly again.

Posted on 14 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to repair the rear lock of the Fiat Doblo
How to repair the rear lock of the Fiat Doblo
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) Is the Fiat Doblo lock damaged? Let's see the disassembly of the Doblo tailgate lock. Remove the handle cover, unscrew the screws placed in it with a…
Instructions for replacing the timing belt on the Fiat Doblò 1.6 Multijet
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Today we will see, in this short guide, the main instructions for removing and replacing the timing belt on the second series Fiat Doblò, with 1.6 M…
How to reset the service light on the Fiat Doblo 2023
How to reset the service light on the Fiat Doblo 2023
Fiat Doblo (2022-2026 / Doblo -3) To correctly and safely complete the manual reset procedure of the service light on your Fiat Doblo third series (year 2023) you only need a few seco…

    Frequently Asked Questions

    • Doblo 2009-2021 - Where is the horn on the Fiat Doblò located? Read answer

Replacing the Timing Chain on a Toyota Yaris

Replacing the timing chain on a Toyota Yaris. Lift the front bonnet and remove the engine cover. Remove the cover above the engine and disconnect all cables on the sides. Remove the plastic cover on the side of the engine. Use a spanner to loosen the chain tensioner roller and pull it out of its seat. Use a socket to unscrew the tensioner securing bolt. Tighten everything with the socket. Refit the engine covers and all chain covers. Test the car's operation.

Watch the video!


by ScegliAuto

More videos