Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Number Plate Bulb on a Fiat 500L

Model: Fiat 500 500 L - Years 2012-2023
Part: License plate light

Before you start, you may choose to remove the number plate for easier access, but this is not mandatory. Begin by prising the bulb holder from the tailgate using a thin but sturdy tool. This will release the two clips securing the bulb holder, allowing you to extract it from the tailgate. At this point, you can disconnect the connector from the bulb holder. Once the connector is removed, you can take out the blown bulb. To fit the new bulb, simply follow the instructions in reverse, and you will have successfully completed the replacement.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulbs in the Fiat 500L
How to Replace the Number Plate Bulbs in the Fiat 500L
Fiat 500 (2012-2023 / 500 L) In today's video, you will see a very simple maintenance task that you can perform independently. Specifically, how to replace the number plate light…
How to replace the number plate lights on a Fiat 500L
How to replace the number plate lights on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this guide, you will learn how to change the number plate light on a Fiat 500L: first, open the boot, and using a screwdriver, remove the number p…
How to Replace the Front Headlamp Bulb of the Fiat 500L?
How to Replace the Front Headlamp Bulb of the Fiat 500L?
Fiat 500 (2012-2023 / 500 L) To replace the front headlamp bulb of the Fiat 500L, open the bonnet and access the back of the headlamp to remove the circular cover. Once this is r…

    Frequently Asked Questions

    • 500 2007-2024 - Why is the license plate light on the Fiat 500 not working? Read answer
    • 500 2007-2024 - How to replace the license plate lights in the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos