Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Removing the Punto air filter

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Air filter
Operation: Removing the Punto air filter

How to replace the air filter on Punto? Let's see the disassembly of the air filter from inside the engine compartment of the Fiat car. We open and lift the front hood, locate the air filter container. We unscrew the tightening screws placed on the side of the air container. We uncover the lid from above the container once the tightening screws have been removed. We remove the old air filter from inside the container. Let's clean the air filter container and get ready to assemble the new piece. We fix the new filter inside the plastic of the filter container, then we tighten the screws on the container cap.


Posted on 26 March 2024 by ScegliAuto



How to replace the air conditioning filter on a Fiat Punto
Fiat Punto (1999-2011 / 188, MK 2) Before being able to begin, we will have to open the front passenger door of our Fiat Punto. Let's start by unscrewing and removing the screws that s
Removing the engine air filter on Fiat Punto Evo
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Let's see the disassembly of the engine air filter on a Fiat Punto Evo. We raise the front hood to access the engine air filter, we secure the same w
Removing the cabin air filter on Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Removing the air filter of a Grande Punto? Let's see how to remove the pollen filter on Fiat. We peel off the lining placed in the lower right part o

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos