Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Temperature Sensor on a Fiat Stilo

Model: Fiat Stilo MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine coolant temperature sensor

Video tutorial

If you notice any malfunction related to the coolant temperature sensor, it is absolutely time to proceed with its replacement. Fortunately, this task is made easier by the sensor's accessible position within the engine bay. Before proceeding, ensure the engine is off and, if possible, disconnect the negative terminal of the battery.

Open the front bonnet and locate the temperature sensor on the lower right side of the engine. It's quite simple as it is green in colour.

Press the clip and push upwards to disconnect the connector. Unscrew the sensor and replace it with the new one. Reconnect the connector, and you're done.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Change the Brake Pads on the Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Replacing the front brake pads is a maintenance task that can easily be done yourself: once the vehicle is raised and secured on appropriate axle sta…
Where is the OBD port of the Fiat Stilo located?
Where is the OBD port of the Fiat Stilo located?
Fiat Stilo (2001-2010 / MK 1) To find the OBD port of your Fiat Stilo, it only takes a few seconds. All you have to do is carefully read the following guide and then follow the va…
How to Replace the Radiator of the Fiat Stilo 1.6 16V
How to Replace the Radiator of the Fiat Stilo 1.6 16V
Fiat Stilo (2001-2010 / MK 1) In this guide, discover how to remove and replace the cooling radiator of the Fiat Stilo with a 1.6 16-valve engine. First, open the bonnet and start…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos