Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the Fiat Ducato headlight

Model: Fiat Ducato X290 - Years 2014-2024
Part: Headlight

Open the hood and disconnect the main connector at the affected headlight. Unscrew the t30 torx bolt located above the bumper (therefore towards the center of the car) and the one located right next to the light. At this point you can simply remove the light by hand and position yourself comfortably on a workbench. Access the bulbs from the rear of the headlight: remove the round rubber cover of the bulb concerned, lift the metal catch that holds it in place and remove it. Pull the bulb to separate it from the base and insert a new one. Proceed backwards for assembly.

Posted on 12 January 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front headlight of a Fiat Ducato.
How to remove the front headlight of a Fiat Ducato.
Fiat Ducato (2014-2024 / X290) To remove the front headlight of a Fiat Ducato, you will need to follow the steps shown in the selected tutorial video. First, open the vehicle's hoo…
Fiat Ducato headlight bulb replacement
Fiat Ducato (2014-2024 / X290) How to replace the headlight bulb on a Ducato? We lift the front hood and find the back of the headlight. We can remove the headlight if we have spac…
How do you replace the headlight bulb on a Fiat Ducato?
How do you replace the headlight bulb on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) The headlight bulb on the Fiat Ducato is replaced by opening the bonnet of the vehicle, so that you can access the components inside the engine compa…

How to Replace the Lift Supports on a Porsche 911

How to remove and replace the lift supports for the hood on a Porsche 911? Let's see how to replace them in this video: Lift the hood and secure it. Use a screwdriver or metal lever to detach the clips that hold the lift support at both ends (or unscrew the mounting pins). Install the new part onto the sheet metal of the front trunk, securing the lift support with the clips/pins. Proceed in the same manner for the removal/installation of the opposite lift support. Finally, test the gas springs installed earlier.

Watch the video!


by ScegliAuto

More videos