Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Interior Bulbs on Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Interior dome light bulb

Learn how to replace the interior bulbs of the ceiling lights in a Fiat Grande Punto. Pry between the ceiling light and the roof panel (without breaking anything), pull the ceiling light out from the panel and disconnect the power connector. Replace the damaged bulb with a new one (same size and voltage). Refit the ceiling light into its housing (press the transparent plastic with your hands until fully secured). Remove the ceiling light located in the boot of the car: find a ceiling light and dismantle it in the same way as the ceiling light in the roof.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Side Indicators on Fiat Grande Punto and Punto Evo
How to Replace the Side Indicators on Fiat Grande Punto and Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, we will see how to disassemble and replace the bulbs of the side indicators, as well as the interior light, on a Fiat Grande Punto and…
Replacing the Headlight Bulbs on a Fiat Grande Punto
Replacing the Headlight Bulbs on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Replacing the bulbs in the rear light of your Fiat Grande Punto? Follow this guide to replace the damaged bulbs. Open the boot lid, and using a screw…
Replacing the Front Headlight Bulbs on the Fiat Grande Punto - Punto Evo
Replacing the Front Headlight Bulbs on the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial video, learn how to remove and replace the front headlight bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, open the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos