Do it yourself
| ||||
|
How to install an aux cable on Fiat 500?
Model: Fiat 500
312
- Years 2007-2021 The procedure for installing an aux cable on a Fiat 500 is very simple and requires a few tools that we will see shortly, but the first thing to do is to check if our car is compatible with the installation of a cable aux. Simply press the cd key twice and if aux appears then we can install it. The tools needed are a small slotted screwdriver, the two car radio extraction keys and the aux cable to install. The procedure is as follows: remove the four plastic covers with the screwdriver as shown in the video, insert the car radio extraction keys to remove it from the dashboard and attach the aux cable connector in the appropriate prrso as shown in the video. Unwind the cable and let it pass where you see fit and reassemble everything.
Posted on 2 April 2024 by ScegliAuto
How to mount the aux cable on the Fiat 500
Fiat 500 (2007-2021 / 312) In order to install a cable with AUX output, it is necessary to: release, using a small screwdriver, the four clips placed at the upper and lower cor
How to listen to music from streaming platforms in a Fiat 500
Fiat 500 (2007-2024 / 312) In this video we can see how to listen to music from streaming platforms (such as Spotify) in a Fiat 500, as the Bluetooth system only supports messa
Guide to replacing the seat handle cable of the Fiat 500.
Fiat 500 (2007-2024 / 312) Below we will see the main steps that will allow us to disassemble and replace the front seat handle cable of the Fiat 500. First, we open the front Other guides that may interest you
|
Frequently Asked QuestionsHow to deactivate the safe lock on a Volkswagen Golf.The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.105
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |