Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Fuses on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuse box

See other generations:
Video tutorial

In this short and simple guide, you will learn how to remove and replace the fuses on a Fiat Grande Punto, as well as on the Punto Evo, in simple and quick steps. In this case, we will replace the fuse for the cigarette lighter; so open the bonnet of your car and remove the plastic cover of the fuse box, located to the right of the battery.

At this point, use pointed pliers to remove the faulty fuse, replacing it with a new one (of the same amperage); insert it back in place and check the operation of the electrical component.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The fuses on the Fiat Grande Punto are located within two fuse boxes installed in the vehicle: the first is inside the cabin, in the lower left part …
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The fuses in the Fiat Grande Punto are located within two fuse boxes present in the vehicle: in this model, the first box can be found in the lower l…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, learn how to remove the car radio from a Fiat Grande Punto (199). This operation is really simple; you just need to have the radio release key…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the fuse of the reversing light of the Fiat Punto located? Read answer
    • Punto 2005-2018 - Where is the fuel pump relay located in the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the air conditioning fuse on Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto turn signal relay located? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos