Do it yourself
| ||||
|
Guide to replacing spark plugs
Model: Fiat Seicento
MK 1
- Years 1998-2010 Spark plugs are a fundamental component of engines and we can replace them ourselves. Once the engine has cooled down for a few hours, you can proceed. The hood is opened and the position of the candles is identified and they are unscrewed with the wrench, which must be held correctly in order to reach even the most hidden candles. It is necessary to check that the new spark plugs that are going to be fitted are suitable for the sealing nuts. It is then necessary to identify the cables that reach the spark plugs, the number of cables is equal to the number of spark plugs, and remove each cable by removing the caps that open by pulling hard. The area where the old candles stood is cleaned and the new ones are put in place of those that have been removed with the key. Finally, the cables are reconnected to the same spark plug that they fed previously.
Posted on 25 July 2023 by ScegliAuto
This video is currently unavailable
How to change the spark plugs of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Let's see how to change the spark plugs on a Fiat 600. We open the engine compartment, lift the front hood, put it in safety, disconnect the battery
How to replace spark plugs on Fiat 600
Fiat Seicento (1998-2010 / MK 1) Do we have ignition problems on our Fiat 600? Let's see in this video in detail how to proceed with the change of candles. We pull the lever to open
How to replace coils on Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) If the spark plug cables have worn out over time and we want to replace them; first we need to get the spark plug cables; so to avoid errors when ord Other guides that may interest you
|
How to deactivate the safe lock on a Volkswagen Golf.The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.087
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |