Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Key of the Fiat Ducato?

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

See other generations:
Video tutorial

To program the key of the Fiat Ducato, insert the key you wish to program into the corresponding ignition barrel. Once the key is inserted, connect a diagnostic tool to the vehicle's OBD port, located under the steering column.

After the scanner is connected, select the vehicle model and its corresponding version; this will allow you to follow all the instructions on the screen, ensuring that the key is functioning.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

In the 2006 Fiat Ducato, how do you reset the service light?
In the 2006 Fiat Ducato, how do you reset the service light?
Fiat Ducato (2006-2014 / X250) In the instrument panel of the 2006 Fiat Ducato, there is a small on-board computer that communicates with the driver in real time. For example, it s…
How do you replace the battery of the Fiat Ducato camper key?
How do you replace the battery of the Fiat Ducato camper key?
Fiat Ducato (2006-2014 / X250) The remote control battery and therefore the key of the Fiat Ducato camper, like most Fiat, Lancia, and Iveco vehicles, is a cr2032 button type. If i…
How to Remove the Thermostat from a Fiat Ducato
How to Remove the Thermostat from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. The thermostat is located near the bottom side of the cylinder head. Start by loosening and re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos