Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Guide on how to replace the license plate lights of the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: License plate light
Operation: Guide on how to replace the license plate lights of the Fiat 500

In this short and simple guide we will understand what are the steps to disassemble and replace the Fiat 500 license plate bulbs, following the instructions below. First of all, let's move to the rear of the car and start by disassembling and removing the ceiling lights of the license plate bulbs, using something thin and pointed to pry the slot; then we disconnect the electrical connector and replace the bulb that we find inside it (of the bulb type). We just have to insert it perfectly on the lamp holder and then check its operation.


Posted on 6 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2023 - Why is the license plate light on the Fiat 500 not working? Read Answer
    • 500 2014-2022 - How to troubleshoot license plate lights in Fiat 500? Read Answer
    • 500 2007-2022 - Why do the license plate lights of the Fiat 500 no longer work? Read Answer
    • 500 2007-2023 - How to replace the license plate lights in the Fiat 500? Read Answer
    • 500 2007-2023 - How to replace the rear license plate light on a Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos