Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on the Fiat Grande Punto 1.2

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Spark plugs

In this video tutorial, you will see the symptoms that indicate it is time to replace the spark plugs on the Fiat Grande Punto 1.2, as well as how to do it. The main causes that lead to spark plug replacement are noticeable when the engine does not deliver the same power; this results in increased engine vibrations at idle and higher fuel consumption, along with jerking and stalling. Therefore, open the bonnet and disconnect the spark plug leads; use a socket spanner with an extension to undo and replace them with new ones!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Fiat Grande Punto?
How to Replace the Spark Plugs on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the spark plugs on a Fiat Grande Punto, open the bonnet to detach the plastic cover on top of the engine block. Once the cover is removed,…
How to Replace the Spark Plugs on the Fiat Grande Punto
How to Replace the Spark Plugs on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Below is the procedure to remove and replace the engine spark plugs on the Fiat Grande Punto, following the instructions provided. First, open the bo…
How to Replace the Spark Plugs on a Fiat Grande Punto
How to Replace the Spark Plugs on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the spark plugs on a Fiat Grande Punto, first open the bonnet to access the top of the engine block. You will find a plastic cover that ne…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos