Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Light on the Fiat 500 L

Model: Fiat 500 500 L - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

The steps required to correctly reset the oil light on the Fiat 500L are very simple and take only a few seconds to complete. It is a standard procedure that anyone can perform, designed to restore the oil life data after an oil change.

First, insert the key and turn it to position one to power on the ignition. Then, within ten seconds, press the accelerator pedal three times in quick succession.

Finally, turn off the ignition and the reset is complete.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2021 / 312) Before you begin, check that the oil change and the general service on your Fiat 500 have been completed. Then, sit in the driver's seat and close al…
Fiat 500 (2014-2022 / 500 X) In this video tutorial, learn how to reset the maintenance warning light for the oil change on the Fiat 500 X. First, get inside the vehicle and conn…
Fiat 500 (2014-2022 / 500 X) In this brief video guide, follow the essential steps and tools required for a service on the Fiat 500, including engine oil change, oil filter, and …

    Frequently Asked Questions

    • 500 2007-2022 - What does the coupon expired warning light on the Fiat 500 mean? Read answer
    • 500 2007-2022 - What does the service light indicate in the FIAT 500? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the engine oil light on the Fiat 500? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos