Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Lights on a Fiat 500X?

Model: Fiat 500 500 X - Years 2014-2022
Part: Tail light

In this tutorial, see how to replace the rear lights on a Fiat 500X. For this simple and quick operation, you will need a 10mm socket and a plastic trim tool. Start by ensuring the key is not in the ignition, then open the boot and remove the two fixing bolts for the light located on the inner edge. Once done, pull it away from the bodywork, disconnect the power connector by pressing the appropriate clip, and fit the replacement by simply following the reverse procedure. Finally, repeat the operation for the opposite light if necessary.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs in the Fiat 500X?
How to replace the front headlight bulbs in the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) In this tutorial we can see how to replace the front headlight bulbs in the Fiat 500X, an extremely simple and quick operation. First of all, make su…
How to Remove the Rear Bumper of a Fiat 500X
How to Remove the Rear Bumper of a Fiat 500X
Fiat 500 (2014-2022 / 500 X) How to remove the rear bumper of a Fiat 500X? Follow these steps carefully. This operation is not too complex if done in order. First, use a screwdri…
How to Fold/Lower the Rear Seats on a Fiat 500X
How to Fold/Lower the Rear Seats on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this video, you will see how to fold or lower the rear seats on a Fiat 500X, as well as on other Fiat group models. First, open the rear door to a…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos