Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How to remove the rear bumper of a Fiat 500X

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Rear bumper
Operation: How to remove the rear bumper of a Fiat 500X

How to remove the rear bumper of a Fiat 500X? Let's see together how to proceed with the various steps. Operation not too complex if you proceed in order. First of all, with a screwdriver (cordless screwdriver) we unscrew the screws located in the upper part of the bumper (together with the rear lights), then, we remove the plastic rivets placed on the sides of the car's stone guards and the last screws in the lower part. Once the bumper is free from any screws or rivets, take it with your hands and pull it away from the body (disconnect any power cables). We mount the new bumper in the sheet metal housing.


Posted on 20 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos