Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Front bumper

Let's see how to remove the front bumper from the Fiat 500X. Lift the bonnet and secure it; using a battery-powered screwdriver or screwdriver, unscrew the securing pins located at the top of the bumper. Once the screws at the top are removed, unscrew the pins of the wheel arch liners (remove the black plastic wheel arch covers) and remove the pins located at the bottom of the bumper. Pull the bumper away from the vehicle body with your hands. To proceed with the installation: position the bumper on the vehicle body and tighten all screws around the wheel arch liners and around the perimeter.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on a Fiat 500X
How to Replace the Front Headlight Bulbs on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Learn how to replace the front headlight bulbs on a Fiat 500X. Begin by removing the plastic cover at the bottom of the bumper with an appropriate sc…
How to Remove the Rear Bumper of a Fiat 500X
How to Remove the Rear Bumper of a Fiat 500X
Fiat 500 (2014-2022 / 500 X) How to remove the rear bumper of a Fiat 500X? Follow these steps carefully. This operation is not too complex if done in order. First, use a screwdri…
How to Replace the Front Headlight Bulb on a Fiat 500X
How to Replace the Front Headlight Bulb on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this video, learn how to replace the position light bulbs on a Fiat 500X. Start by using a suitable screwdriver to remove the plastic cover locate…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos