Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fiat 500 1.3 MultiJet diesel filter replacement

Model: Fiat 500 312 - Years 2007-2021
Part: Diesel fuel filter

In this video tutorial we will see how to replace the diesel filter on the Fiat 500 1.3 Multijet. First of all, we open the engine hood and locate the diesel filter, which we find in the upper left corner; after which we disconnect the electrical connector that we find on the upper part and unscrew the plastic ring nut of the filter, then disconnecting the fuel pipe, as shown in the video. At this point we remove the filter cartridge contained inside, replacing it with the new one; then we reassemble everything, applying the reverse procedure!

Posted on 20 March 2022 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the diesel filter of the Fiat 500 1.3 Multijet.
How to replace the diesel filter of the Fiat 500 1.3 Multijet.
Fiat 500 (2007-2022 / 312) Today's guide will show us the steps on how to dismantle and replace the diesel filter of the Fiat 500 1.3 Multijet, following the instructions below…
How do you replace the diesel filter on the Fiat 500X 1.3 multijet?
Fiat 500 (2014-2022 / 500 X) In order to replace the diesel filter of the Fiat 500X you have to go and open the bonnet to access the engine compartment: the diesel filter will in…
Replacement of the air filter of the Fiat 500 X 1.3 Multijet
Replacement of the air filter of the Fiat 500 X 1.3 Multijet
Fiat 500 (2014-2022 / 500 X) Let's see in this short and simple guide how to remove and replace the air filter on the engine of the Fiat 500 X, with 1.3 MultiJet engine. First we…

How to Install an Additional Horn on a Fiat Punto

It may happen that the original horn starts to produce a sound that is noticeably underwhelming; at this point, you can decide to install a pair of sounders connected in parallel with the original one to achieve a more assertive sound. The installation is very easy, but it is important to direct the sound output towards an air intake, so you need to shape a support bracket to fix it to the slam panel with a single bolt. Once secured, take the positive power from the fuse box using a 2.5 mm² cable, tapping into the purple wire directly under the relay while connecting the ground directly to the negative terminal of the battery.

Watch the video!


by ScegliAuto

More videos