Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield washer pump in the Fiat Ducato van?

Model: Fiat Ducato X250 - Years 2006-2014
Part: Pump

As we can see in this tutorial, replacing the washer pump in the Fiat Ducato van is a very simple and fast operation. First of all we open the bonnet and locate the pump, it is obviously located outside the relative tank, located on the passenger side. Next, we disconnect the lower tube, grab the pump and, turning it in both directions and pulling it upwards, pull it out of the housing. Once this is done we can disconnect the upper power connector, pressing the metal clip inwards, and mount the replacement following the reverse procedure.

Posted on 25 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the windshield washer pump of the Fiat Ducato x250
How to disassemble the windshield washer pump of the Fiat Ducato x250
Fiat Ducato (2006-2014 / X250) In this guide we will see how to disassemble and possibly replace the windshield washer pump of the Fiat Ducato, model x250. The component that you e…
How do you disassemble the windshield wiper pump in the Fiat Ducato?
How do you disassemble the windshield wiper pump in the Fiat Ducato?
Fiat Ducato (2014-2024 / X290) The pump that is responsible for sending water onto the windshield, so that it can then be washed with the windshield wiper brushes, in the Fiat Duca…
How to tell if the windshield washer pump is not working
How to tell if the windshield washer pump is not working
Fiat Ducato (1993-2016 / MK 2) In this video we will see how to verify that the windshield washer pump is working. In this case, the test is being conducted on a Fiat Ducato X244, …

Other guides you may be interested in

How to Remove the Door Panel on a Renault Megane

How do you remove the door panel on a Renault Megane? Follow these steps for disassembly. Before starting, disconnect the battery terminals located in the boot. Use a lever to remove the plastic cover of the release handle, then remove the handle cover on the panel. Using a screwdriver, unscrew the securing screws located in the plastic handle. Once all screws are removed, use the lever to detach the window switch panel, the speaker, and all the plastic clips securing the door. Pull the door panel away by hand, disconnect any power connectors and release cable.

Watch the video!


by ScegliAuto

More videos