Do it yourself
| ||||
|
Fiat Punto - Video tutorial
Model: Fiat Punto
Punto EVO, Grandepunto , MK 3, 199
- Years 2005-2018 In order to program and copy a remote control key, it is necessary to have a "zed full" type transponder programmer. In detail, take the new key to be programmed and insert it on the programmer seat, then select the car model on the touch display, then click on "immobilizer", then click on "continue" and then on "chip decoding" and then select the chip type. Then turn on the car ignition and wait for the chip to be recognized, click on "continue" and wait for the transponder to be precoded, enter the number of keys to program. Turn on the ignition again and click on "continue" after which turn off the ignition again. Within ten seconds, turn on the ignition with the new key and then press "ok". By then the new key will have been programmed.
Posted on 25 April 2024 by ScegliAuto
How to program the remote control of the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video we will show you how to program the Fiat Grande Punto remote control. Take the new key with remote control and insert it into the contr
How to replace the remote control battery on Fiat Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Does the key remote control no longer work? Let's see how to change the battery on a Fiat Punto key. We take our ignition key and snap the metal key.
Replacement of the remote control battery of the Fiat Punto Evo
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this short and simple guide we will see the step by step instructions for removing and replacing the remote control battery of the key of the Fiat Other guides that may interest you |
Frequently Asked QuestionsHow do I replace the Land Rover Evoque auxiliary battery?In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |