Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the remote control battery of the Fiat Punto Evo

Model: Fiat Punto MK 3, 199, Grandepunto , Punto EVO - Years 2005-2018
Part: Key

In this short and simple guide we will see the step by step instructions for removing and replacing the remote control battery of the key of the Fiat Punto Evo, but also of the Grande Punto and the 500. First we take our remote control and start by unscrewing the screw. side that we find on the key housing, using a Phillips screwdriver; then we remove the battery cart, as shown in the video. At this point we are going to replace the battery with the new one, of the right type; insert it in the correct direction on the trolley and assemble everything on the remote control!

Posted on 31 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the key shell of the Fiat Punto Evo.
How to disassemble and replace the key shell of the Fiat Punto Evo.
Fiat Punto (2005-2018 / MK 3, 199, Grandepunto , Punto EVO) Below we will see the instructions that will allow us to disassemble and replace the shell of the key for the Fiat Punto Evo, as well as the Grande P…
How to replace the battery of the Fiat Punto remote control
How to replace the battery of the Fiat Punto remote control
Fiat Punto (2005-2018 / MK 3, 199, Grandepunto , Punto EVO) Today we will explain how to replace the battery of the Fiat Grande Punto remote control. To perform this operation, we need to lift the ignition key…
How to change the remote control battery of a Fiat Punto key
Fiat Punto (2005-2018 / MK 3, 199, Grandepunto , Punto EVO) Replacing the remote control battery of a Fiat Punto car key is a very simple operation, all you will need is a small flat-blade screwdriver and of c…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos