Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the maintenance warning light on the Fiat 500x

Model: Fiat 500 500 X - Years 2014-2022
Part: Warning light – error code

After having carried out an assistance intervention or carried out the cutting of the car, it is necessary to reset the oil change service. To reset the service signal on the on-board computer, proceed as follows: turn on the control panel (do not start the engine), press the accelerator pedal fully three times in rapid sequence, then turn off the switch by turning the key and, at that point, the service light will have been reset. To check that the signal has been erased correctly, turn the ignition back on by turning the key.

Posted on 7 April 2022 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2014-2022 / 500 X) In order to reset the Service light of the Fiat 500X, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on…
Fiat 500 (2014-2022 / 500 X) Through these simple steps, we will see how to reset the maintenance light for the engine oil change in the Fiat 500X. After performing the service, …
Fiat 500 (2014-2022 / 500 X) To reset the Service light that appears on the instrument panel of the Fiat 500X, you need to turn on the instrument panel by inserting the key into …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2021 - What does the S warning light on the Fiat 500 indicate? Read answer
    • 500 2007-2022 - What does the yellow warning light with a triangle mean in the Fiat 500? Read answer
    • 500 2014-2022 - What does the "driving mode not available" error mean on my Fiat 500X? Read answer
    • 500 2007-2024 - What does the "Hill holder / ESP not available" warning light mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does the warning triangle with the exclamation point mean on the FIAT 500? Read answer

How to Change the Cabin Filter on a Fiat Punto Evo

How to change the air conditioning pollen filter on a Fiat Punto Evo? Remove the plastic cover of the centre tunnel (right side of the tunnel), then remove the plastic cover from the filter cap (located inside the centre tunnel), and extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the housing: refit the filter cap and secure the container (close the glove compartment located in the centre tunnel). Check the correct installation of the previously fitted parts.

Watch the video!


by ScegliAuto

More videos