Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on the Fiat Doblò?

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the oil service on the Fiat Doblò, a very simple operation that should only be performed after completing the required maintenance work. First, turn on the instrument panel, then fully press the accelerator pedal while simultaneously pressing the brake pedal seven times in a row. Once done, wait at least 60 seconds with the accelerator pedal still pressed, then turn off the ignition, release the pedal, and wait a few more seconds.

Finally, start the vehicle and check that the procedure has been completed correctly.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Fiat Doblò
Resetting the Service Light on the Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) This guide provides instructions to reset the service light for the routine maintenance oil change on the Fiat Doblò. First, get inside the vehicle a…
How do you reset the Service light on the Fiat Doblo 263?
How do you reset the Service light on the Fiat Doblo 263?
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) The Service light turning on, in the Fiat Doblo 263, as well as in any car, means that it is time for a scheduled maintenance, so we just have to pre…
How to Reset the Engine Oil Light on a Fiat Doblò
How to Reset the Engine Oil Light on a Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) In this guide, we will see the procedure that will allow us to reset the service light for the regular maintenance oil change on the Fiat Doblò. Firs…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos