Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light on a Fiat Doblò

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Service warning light

In this guide, we will see the procedure that will allow us to reset the service light for the regular maintenance oil change on the Fiat Doblò. First, get in the vehicle and turn on the ignition; then, press the accelerator pedal fully and hold it down, followed by pressing the brake pedal seven times, as shown in the video. At this point, wait about forty seconds before turning off the ignition; wait another forty seconds before turning the ignition back on, thus completing the service reset operation!

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on a Fiat Doblò?
How to Reset the Oil Warning Light on a Fiat Doblò?
Fiat Doblo (2022-2026 / Doblo -3) To reset the oil warning light on a Fiat Doblò, you need to change the oil by draining the old oil from the drain plug at the bottom of the engine co…
How to Reset the Service Light on the Fiat Doblò
How to Reset the Service Light on the Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In today's video tutorial, you will see how to reset the maintenance light for the engine oil change on the Fiat Doblò, following the instructions be…
Replacing the Engine Oil and Oil Filter on the Fiat Doblò 1
Replacing the Engine Oil and Oil Filter on the Fiat Doblò 1
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) In this video, you will see how to carry out the routine maintenance service for an oil change, replacing the engine oil and oil filter on the first …

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2009-2021 - What does the flashing oil warning light mean in Fiat Doblò? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos