Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the ABS Sensor on a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the ABS sensor on a Fiat Punto, specifically for the left rear wheel, lift the car with a jack so that the corresponding rear wheel can be removed by loosening its fixing bolts. Once the wheel is removed, also loosen the bolts securing the left rear seat by lifting the carpet underneath; this will allow access to the ABS cable passage hole.

By disconnecting the cables, you can remove the sensor from its connectors, enabling you to insert a new one.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Steering Angle Sensor on the Fiat Grande Punto?
How to Replace the Steering Angle Sensor on the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the steering angle sensor on the Fiat Grande Punto, completely disassemble the steering wheel by removing the airbag located at the centre…
How to Replace the Oil Pressure Switch on a Fiat Grande Punto?
How to Replace the Oil Pressure Switch on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the oil pressure switch on a Fiat Grande Punto, open the bonnet to access the engine compartment. The pressure switch is located at the bo…
How to Remove the Oil Pressure Sensor on the Fiat Punto?
How to Remove the Oil Pressure Sensor on the Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the oil pressure sensor on the Fiat Punto, first open the bonnet and disconnect the mass air flow connector. Next, disconnect the hoses to …

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos