Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Oil Pressure Sensor on the Fiat Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the oil pressure sensor on the Fiat Punto, first open the bonnet and disconnect the mass air flow connector. Next, disconnect the hoses to remove the plastic engine cover.

The oil pressure sensor is located at the rear, near another connector that must be unplugged. Once disconnected, use a Torx spanner to loosen the single screw securing the sensor.

Once loosened, the sensor can be removed and cleaned; when the operation is complete, refit the removed parts.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Pressure Switch on a Fiat Grande Punto?
How to Replace the Oil Pressure Switch on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the oil pressure switch on a Fiat Grande Punto, open the bonnet to access the engine compartment. The pressure switch is located at the bo…
Pressure Sensor Replacement on Fiat Punto
Pressure Sensor Replacement on Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Lift the bonnet and insert the support rod. First, remove the air box by unscrewing the three screws and removing the clip. The "absolute pressure" s…
Where is the crankshaft sensor located on the Fiat Punto 1.2 8V?
Where is the crankshaft sensor located on the Fiat Punto 1.2 8V?
Fiat Punto (1999-2011 / MK 2, 188) In this video, we will see where the crankshaft sensor is located on the Fiat Punto 1.2 8V. It is positioned on the pulley of the belt near the crank…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos