Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of the Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

Replacing the battery in your Fiat 500 key is very simple and takes just a few seconds to complete the entire procedure correctly. Follow the instructions below and you won't encounter any difficulties.

First, lift the physical emergency key and then unscrew the screw located on the side of the cover using a flat screwdriver. Once done, remove the battery holder and replace it with a brand new one. Finally, reassemble everything correctly, ensuring you remember to screw back the previously removed screw.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Press the designated unlock button to extract the physical emergency key from the electronic key of your Fiat 500 X. Using the extracted physical key…
How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Replacing the remote battery is a simple and quick task for any car remote. The most commonly used battery model is the CR 2032, available online or …
How to Replace the Key Battery on a Fiat 500 Electric
How to Replace the Key Battery on a Fiat 500 Electric
Fiat 500 (2020-2026 / 500 E, 332) This article explains how to replace the battery in the key of a Fiat 500 Electric. The procedure requires only a small flathead screwdriver and take…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos