Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Tailgate Lock of the Fiat Freemont - Dodge Journey

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Trunk lock

Today, we will see how to remove and replace the tailgate lock of the Fiat Freemont and the Dodge Journey. First, open the tailgate and start removing the plastic panel; to do this, unscrew the fastening screws, prying at the sides to remove it, as shown in the video. At this point, unscrew the fastening screws of the lock, disconnecting the electrical connector to remove it; replace the tailgate lock with the new one, following the video tutorial to the end!

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tailgate Lock on a Dodge Journey - Fiat Freemont
How to Replace the Tailgate Lock on a Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. how to remove and replace the tailgate lock on a Dodge Journey, as well as on a Fiat Freemont. First, open the tailgate and start by removing the plastic.. …
Removing the Rear Light on Fiat Freemont - Dodge Journey
Removing the Rear Light on Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. to remove the rear light on a Fiat Freemont and a Dodge Journey by following these simple instructions. First, open the boot and unscrew the two fixing.. …
Removing the Cigarette Lighter on Dodge Journey - Fiat Freemont
Removing the Cigarette Lighter on Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. Removing the rear cigarette lighter on the Dodge Journey and Fiat Freemont is extremely simple. You will only need a plastic trim tool. Use this.. …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos