Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cigarette Lighter on Dodge Journey - Fiat Freemont

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Cigarette lighter

Removing the rear cigarette lighter on the Dodge Journey and Fiat Freemont is extremely simple. You will only need a plastic trim tool. Use this tool by inserting it into the surrounding gap of the plastic where the cigarette lighter is mounted and, prying it, detach it little by little (see video). Once the plastic is removed, it will be easy to disconnect the cigarette lighter connector by pressing on the tab. Now, with a small flat screwdriver, press on the small slot inside the cigarette lighter and, at the same time, pull it from behind.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Seat on the Dodge Journey - Fiat Freemont
Removing the Front Seat on the Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. seat on the Dodge Journey, as well as on the Fiat Freemont. First, open the front door and start by removing the plastic covers located on the side.. …
Removing the Front Seat of the Dodge Journey - Fiat Freemont
Removing the Front Seat of the Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. to the driver's seat, of the Dodge Journey and Fiat Freemont. First, open the front door and start unscrewing the fastening screws found on the plastic.. …
Removing the Rear Light on Fiat Freemont - Dodge Journey
Removing the Rear Light on Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. you will learn how to remove the rear light on a Fiat Freemont and a Dodge Journey by following these simple instructions. First, open the boot and unscrew.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos