Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tailgate Lock on a Dodge Journey - Fiat Freemont

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Door lock

In this video tutorial, you will learn how to remove and replace the tailgate lock on a Dodge Journey, as well as on a Fiat Freemont. First, open the tailgate and start by removing the plastic cover panel by unscrewing the fixing screws and prying it off; then unscrew the additional screws of the lock using a Torx screwdriver, as shown in the video. At this point, extract the lock by disconnecting the electrical connector and the cable; replace it with the new one and reassemble everything by following the reverse procedure!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Tailgate Lock of the Fiat Freemont - Dodge Journey
Removing the Tailgate Lock of the Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. to remove and replace the tailgate lock of the Fiat Freemont and the Dodge Journey. First, open the tailgate and start removing the plastic panel;.. …
How to Replace the Rear Seat Belts on the Fiat Freemont - Dodge Journey
How to Replace the Rear Seat Belts on the Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. to remove and replace the rear seat belts on the Fiat Freemont, as well as the Dodge Journey. First, open the tailgate and start by reclining the rear.. …
Removing the Rear Light on Fiat Freemont - Dodge Journey
Removing the Rear Light on Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. you will learn how to remove the rear light on a Fiat Freemont and a Dodge Journey by following these simple instructions. First, open the boot and unscrew.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos